Now I've had trouble trying to get this fixed before. I, and my mother before me, have taken the rims in to get straightened countless times, and each time they come back claiming they're straight as an arrow but wobbling just the same. I decided to get to the bottom of it myself, so with some minor assistance from Father I jacked up the car and spun the wheel to see what was up.
It was no surprise whatsoever to see the outside of the tire wobbling back and forth quite visibly. What was a surprise was seeing the rim itself spinning straight as an arrow. Apparently the tire itself is mis-shapen. So, new tires are clearly on the menu.
But that's a blog post for another day. You see, while I had the car up, father commented on the shoddy shape my hubcaps were in, with their peeling silver paint not even hiding half of the gray plastic underneath. I'd been intending to repaint them, but since the hubcaps are secured to the wheels by the lug nuts, it's quite inconvenient to remove them. (Though I am happy they're securely retained at all other times)
Today I decided that enough was enough, and I headed over to Canadian Tire and picked up some supplies: a fine grit scuff pad to clean/sand the hubcaps, some latex gloves to keep my manicure clean, and a can of Krylon Fusion Nickel Shimmer to do the deed.
As with any paint job, prep is everything, and I spent a good half hour or so wet sanding the grime and loose paint off the hubcaps with the scuff pad. In hindsight, a medium grit scuff pad probably would have been more effective.
The paint itself went on quite easily, in about 4 or 5 quick light coats on each hubcap. After painting the first hubcap I took a before and after shot, for your ogling pleasure.
The paint dries to the touch after 15 minutes, and "dries" after 1 hour, but only actually fully cures after 7 days. I'll probably leave the hubcaps hanging in the back yard until tomorrow before putting them back on. (Partly to let the paint cure, partly because I feel like having a little lunch and then a nap)
No comments:
Post a Comment